Commercial 5 HP, Single Phase-230V (Inlcudes Control Box, DC1400, DC500 & DRV330)


The 5hp pump with the CR1461 provides a much longer life than our standard residential systems. This is what makes them better for places that clean more often. This system can be used in a wide variety of applications for general cleaning and for auto body sanding.  It only allows for a single user to clean at a time. This unit allows for much larger dirt capacity. The primary filter has a capacity of 24 gallons and the secondary filter has a capacity of 27 quarts.

Please call to purchase 1-800-221-1862. Technical assistance and planning support provided.

Brand: VacuMaid

Out of stock

SKU: CR1461 Categories: ,

60 Hz. 50 Hz.
Induction Motor 1Ph, 5 H.P., 3450 RPM 1Ph, 3.5HP, 3450 RPM
Voltage 230 Volts 200-220 Volts
Amperage 21.0 17.0
Length 19-9/16
Electrical Service to Unit No. 10

Primary Filter – DC-1400
Filtration Cyclonic funnel primary, standpipe secondary with convenient lift off inspection lid and safety filter.
Inlet and Outlet Connections 2″
Capacity 24 Gal.
Diameter 21″
Height 62″
Radius including legs 15″
Shipping Weight 168 lbs.
Replacement Filter FD-1400

Secondary Filter – DC-500
Filtration HPB2H
Inlet and Outlet Connections 2″
Capacity 27 Qts.
Diameter 13-5/8″
Height 25-3/4″
Shipping Weight 10 lbs.
Replacement Bag HFB-4
Optional Bag Paper Bag HPB-1
NOTE: All commercial and industrial units should use 2-conducters, 18 gauge minimum for low voltage wiring (2VM-18001).
NOTE: Relief Valve should be set at a preferred setting of 80″ H2O at 60 Hz. and 162 cm H2O at 50 Hz., when possible use the preferred/recommended settings above.
NOTE: The first 5 feet of metal tubing MUST be used on exhaust (SF-207).
(Upgrade to a DC-750 if fine dust control is required)

Related Products