Commercial 5 HP, Single Phase – 230V (Includes Control Box, DC1240, DC500 & DRV330)
$10,204.00
The series induction motor power units are designed to be used in semi commercial and commercial applications. These units are equipped with transformers, relays, and enclosed 24v low voltage remote control panel that acts as a motor starter. These make ideal units for dental operations, restaurants, small hotel, and apartment complexes, nursing homes, service stations, and other small businesses. The 1400 series consists of three major components, the power unit, which is an induction motor directly connected to a regenerative blower, and the primary dirt separator and secondary dirt collector. The voltage and motor type will depend on the needs of the specific application for which it is installed.
Brand: VacuMaid
Out of stock
MODEL CR-1451 60 Hz. 50 Hz.
Induction Motor: ………………………………………….. 1Ph, 5 H.P., 3450 RPM 1Ph, 3.5HP, 3450 RPM
Voltage: …………………………………………………………….. 230 Volts 200-220 Volts
Amperage: ……………………………………………………………………. 21.0 17.0
Length: ……………………………………………………………….. 19-9/16
*Electrical Service to Unit: ………………………………………………………. No. 10
RECOMMENDED RELIEF VALVE SETTINGS: ……………………… **77″ H2O **160.8 cm H2O
Primary Filter – DC-1240AC w/Air Channel
Filtration: …. Cyclonic funnel primary,standpipe secondary with
… safety screen and convenient lift off inspection lid.
Inlet and Outlet Connections: …………………………………………………………. 2″
Diameter: ……………………………………………………………….. 14-1/8″
Height: ……………………………………………………………….. 37-1/4″
Capacity (Approx.): ……………………………………………………………… 27 Qts.
Shipping Weight (Approx.): …………………………………………………. 23.0 lbs.
Replacement Bag …………………………………………………………………. PB-4M
Secondary Filter – DC-500
Filtration: ………………………………………………. Reusable filter bag.
Inlet and Outlet Connections: …………………………………………………………. 2″
Diameter: ……………………………………………………………….. 13-5/8″
Height: ……………………………………………………………….. 25-3/4″
Capacity (Approx.): ……………………………………………………………… 27 Qts.
Shipping Weight (Approx.): …………………………………………………. 10.0 lbs.
Replacement Bag: …………………………………………………………………. HFB-4
* Electrical Service to unit should be installed by a licensed electrician.
**Preferred Settings
CP-1400 A, B, or C
Control Box with 24 Volt
Remote System
NOTE: All commercial and industrial units should use
2-conducters, 18 gauge minimum for low voltage wiring
(2VM-18001).
NOTE: Relief Valve should be set at a preferred setting of 80″
H2O at 60 Hz. and 162 cm H2O at 50 Hz, when possible use
the preferred/recommended settings above.
NOTE: The first 5 feet of metal tubing MUST be used on
exhaust (SF-207).
CR1400_Owners_Manual.pdf [Download not found]