30′ Garage Kit
1-1/4” Hose (30’)
Hose Hanger 3. Dusting Brush
Upholstery Tool 5. Crevice Tool
Tool Storage Bag
USING YOUR ATTACHMENTS & CLEANING TOOLS
MOUNTING THE HOSE HANGER
Mount high enough so you can loop your hose 4-5 times and still clear the floor.
Predrill holes with 1/8” drill bit. Mount to the stud using the two screws provided.
First time use, you will need to attach the curved wand and cuff to the hose. You will twist the wand to the LEFT as you thread it onto the hose. Note: This is the opposite direction of typical threading.
Coil the hose into 4-5 loops on the floor then pick up and put onto hanger.
Provides you extra length for floor cleaning or reaching high areas.
To attach: Slide collared end onto metal curved wand. To use: Adjust by pressing down on the ratcheting mechanism in the middle of the wand to release and extend.
PREMIUM CLEANING TOOLS
All cleaning tools will attach to either the metal curved wand or the telescopic wand by pushing firmly onto the end.
Works well for cleaning car upholstery & carpet.
Reach into cracks and crevices that are hard to reach.
Use for dusting shelves, tables, dashboards, etc.
For cleaning light dirt & dust on hard floor surfaces.
To use: Attach to telescopic wand and go back and forth over the area to be cleaned. Do not force the front of the brush down when moving forward. Allow the brush to gently glide across the floor to pick up larger debris.
(FT220 floor tool is recommended for larger debris.)