Cleaning with Garage Vac

This system provides you two cleaning options…suck it up or blow it out. This system is a traditional vacuum cleaner allowing you to clean the garage, workshop, basement, or vehicles with the power and ease of a central vacuum. But, it also has a Blow Feature allowing you to connect to an additional port that uses exhaust air to blow leaves out of the garage, dust off cars, and even sawdust off work benches.

Vacuuming

Inserting the hose
The hose connects to the system through the utility valve inlet on the front of the unit by lifting the door open and inserting the hose. See below for using your attachments & cleaning tools.

On/Off
Switch Insert the hose before turning the unit on. The system is turned on and off by flipping the switch on the side of the unit.

 

Blowing

The exhaust will operate as a light blower for your shop or garage. This feature does not replace a leaf blower. (Popping noise & some air leakage is common.)To operate the blowing feature: Attach the hose to the black

Exhaust/Blow
Stem located on the side of the unit. For this feature to operate, you must also open the utility valve on the front of the unit and insert the additional cuff that is included with your system. This must remain inserted to hold the door open for the blow feature to work. When finished, turn off the unit first, then remove both the hose and cuff from the two inlets.

 

Variety of Tools for a Variety of Uses
This system comes with a variety of tools and accessories for your garage cleaning needs. The standard hose is 30 ft. long (a 50’ version is also available), so you won’t have to pull and stretch to make it reach. There is a floor brush for the garage or shop floor and premium cleaning tools for dusting and cleaning upholstery, vehicle floors and in the cracks and crevices of your vehicle or shop bench. After you clean up the car and work places, you can tackle the leaves on the floor of the garage. Also included are storage accessories such as a hose hanger and caddy bag for tool storage. An extension wand is also included for added reach and above-floor cleaning.

 

USING YOUR ATTACHMENTS & CLEANING TOOLS

Telescopic Wand
Provides you extra length for floor cleaning or reaching high areas.To use: Adjust by twisting the ratcheting mechanism in the middle of the wand to release and extend. Twist back to tighten.

Floor Brush
For cleaning light dirt & dust on hard floor surfaces. To use: Attach to telescopic wand and go back and forth over the area to be cleaned. Do not force the front of the brush down when moving forward. Allow the brush to gently glide across the floor to pick up larger debris. (FT220 floor tool is recommended for larger debris.)

CLEANING TOOLS
All cleaning tools will attach to either the hose end or the telescopic wand by pushing firmly onto the end.
a) Upholstery Tool Works well for cleaning car upholstery & carpet.

b)Crevice Tool Reach into cracks and crevices that are hard to reach.

c)Dusting Brush Use for dusting shelves, tables, dashboards, etc.

Hose Hanger
Loop hose on hanger approx. 4-5 times or loop hose on floor and then pick up and hang on hanger.

Free Shipping on Orders $60 & Up - Continental US only Dismiss